Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Power Seat System >> Repair Instructions >> Driver Seat Adjuster Memory Switch Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Switch Panel Electrical Connector
    GM750778Courtesy of GENERAL MOTORS CORP.
  1. Position the memory seat switch to the lock and door lock and side window switch (1).
  2. Connect the electrical connector (2) to the memory seat switch.
    3. Fig 2: Identifying Door Lock & Side Window Switch - Driver
    GM690976Courtesy of GENERAL MOTORS CORP.
  3. Install the door lock and side window switch (1). Verify that the front retaining clips and the rear retaining clips are fully seated.
scientia non olet · About Mike's Workshop Manuals