Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Cellular System, Entertainment System, And Navigation System >> Repair Instructions >> Digital Radio Receiver Replacement >> Removal Procedure

Removal Procedure

    IMPORTANT: Do NOT swap digital radio receivers between vehicles. Swapping digital receivers between vehicles will activate the digital radio Theftlock® and "XM Theftlock®" will display.
  1. Lower the right closeout insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side .
    2. Fig 1: Identifying Module Mounting
    GM1237407Courtesy of GENERAL MOTORS CORP.
  2. Remove the electrical connector (1) from the receiver.
    3. Fig 2: View Of Connector
    GM1237408Courtesy of GENERAL MOTORS CORP.
  3. Remove the antenna electrical connector (1) from the receiver.
    4. Fig 3: View Of Insulator Panel & Retaining Nuts
    GM1236121Courtesy of GENERAL MOTORS CORP.
  4. Remove the nuts retaining the receiver to the insulator panel.
  5. Remove the receiver from the vehicle.
scientia non olet · About Mike's Workshop Manuals