Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Isuzu >> 2006 >> i-280 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (Cruise Control System) >> Repair Instructions >> Cruise Release Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Isuzu i-370, 2007 Isuzu i-290, 2007 GMC Canyon, and 2007 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Cruise Release Switch
    GM1302096Courtesy of GENERAL MOTORS CORP.
  1. Slide only the cruise release switch retainer into the brake pedal bracket, until the locking tabs are fully engaged.
  2. Connect the electrical connector to the cruise release switch.
  3. Adjust the cruise release switch. Refer to Cruise Release Switch Adjustment .
scientia non olet · About Mike's Workshop Manuals