Installation Procedure
WARNING: This page is about a different car, the 2007 Isuzu Ascender, 2007 GMC Envoy, 2007 Chevrolet TrailBlazer, and 2007 Buick Rainier. However, it is still accessible from the selected car via links, so may be relevant.
- Install the button assembly to the overhead console.
- Install the garage door opener to the overhead console. Fully recess the light indicator into the opening (1).
- Install the 3 retaining screws to the garage door opener.
Tighten: Tighten the screws to 0.8 N.m (7 lb in).
- Connect the electrical connector to the garage door opener (3).
- Install the overhead console. Refer to Roof Console Replacement .
NOTE:
Refer to FASTENER NOTICE
.