Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Isuzu >> 2005 >> Ascender Limited, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Control System - 4.2L - Introduction) >> Repair Instructions >> Intake Air Temperature (IAT) Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Locating Intake Air Temperature Sensor
    GM732048Courtesy of GENERAL MOTORS CORP.
  1. Install the IAT sensor (1) to the air duct with a pushing and twisting motion.
  2. Reconnect the IAT sensor electrical connector.
scientia non olet · About Mike's Workshop Manuals