Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Isuzu >> 2005 >> Ascender Limited, RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 5.3L - Introduction >> Repair Instructions >> Knock Sensor (KS) Replacement (Right Side) >> Removal Procedure

Removal Procedure

    Fig 1: Knock Sensor
    GM1528397Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the electrical connector (3) from the knock sensor (2).
  2. Remove the knock sensor bolt (1).
  3. Remove the knock sensor (2) from the engine block.
scientia non olet · About Mike's Workshop Manuals