Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Isuzu >> 2004 >> Rodeo 3.2 W, 4WD, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Warning Systems >> Tire Pressure Monitoring System >> Tech 2 Scan Tool >> Tech 2 Features

Tech 2 Features

  1. Tech 2 is a 12 volt system. Do not apply 24 volts.
  2. After connecting and/or installing the vehicle communication interface (VCI) module, PCMCIA card and data link connector (DLC) to the Tech 2, connect the tool to the vehicle DLC.
  3. Make sure the Tech 2 is OFF when removing or installing the PCMCIA card.
  4. The Tech 2 has the capability of 3 snapshot.
  5. The PCMCIA card is sensitive to magnetism and static electricity, so care should be taken in the handling of the card.
  6. The Tech 2 can not plot a graph when replaying a snapshot.
  7. Always return to the Main Menu by pressing the EXIT key several times before shutting down.
  8. To clear diagnostic trouble codes (DTCs), open Application Menu and press "Clear DTC".
scientia non olet · About Mike's Workshop Manuals