Circuit Description
- The throttle position (TP) sensor circuit provides a voltage signal relative to throttle position (blade angle).
The throttle blade angle will vary about 0.5V at closed throttle to about 4.23V at wide open throttle (WOT).
- The DC motor circuit provides a voltage signal relative to command throttle position (blade angle).
- This DTC is detects if the value of the actual throttle position minus the command throttle position is greater than 2deg when the command value changed more than 2 degree.
Once this DTC is detected, P1295 (or P1299) will be set at the same time.