Conditions For Setting The DTC
- Deviation angle:-10-10deg
- Test enable: wait time 2seconds
- ECT is below 60°C
- Ignition voltage is below 10.96V
- Engine running
- BARO is below 72 kPa
- IAT is below -10 °C
- No DTC's below set:
- BARO sensor (P0106, P0107, P0108)
- IAT sensor (P0112, P0113)
- ECT sensor (P0116, P0117, P0118, P0125)
- Crankshaft angle sensor (P0341, P0342, P0346, P0347)
- Ignition voltage (P0563)
- OCV Solenoid (P1690, P1691, P1692, P1695, P1696, P1697)
- ROM (P0601)
- RAM (P0604)