Conditions For Setting The DTC

The engine is running.
No TP sensor DTC set.
No MAP frequency DTCs are set.
System voltage is higher than 11.0 volts.
The time since barometric pressure was update is 3 minutes.
Engine speed is between 1000rpm and 4000rpm.
Engine coolant temperature is above 75°C.
The following conditions fails for 1 seconds.
No change in A/C clutch or TCC status.
Throttle position is steady, changing less than +/-0.2V/50ms.
The absolute value of the difference for actual BPW value and expected BPW value is more than high threshold value, or less than low threshold value for 10 seconds.