Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Isuzu >> 2004 >> Axiom Base, RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Diagnostic Information & Procedures >> On Vehicle Service >> EVAP Canister Vent Solenoid >> Installation Procedure

Installation Procedure

  1. Slide the into EVAP canister vent solenoid into the mounting bracket.
    Fig 1: Sliding Into Evap Canister Vent Solenoid Into Mounting Bracket
    G02788936Courtesy of ISUZU MOTOR CO.
  2. Connect the connector and hose.
    Fig 2: Connecting Connector And Hose
    G02788937Courtesy of ISUZU MOTOR CO.
  3. Connect the negative battery cable.
scientia non olet · About Mike's Workshop Manuals