Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Isuzu >> 2004 >> Axiom Base, 4WD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Diagnostic Information & Procedures >> On Vehicle Service >> Wire Harness Repair: Twisted Shielded Cable >> Removal Procedure

Removal Procedure

  1. Remove the outer jacket.
  2. Unwrap the aluminum/mylar tape. Do not remove the mylar.
    Fig 1: Unwrapping Aluminum/Mylar Tape
    G02788944Courtesy of ISUZU MOTOR CO.
  3. Untwist the conductors.
  4. Strip the insulation as necessary.
    Fig 2: Untwisting Conductors
    G02788945Courtesy of ISUZU MOTOR CO.
scientia non olet · About Mike's Workshop Manuals