Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Isuzu >> 2003 >> Axiom Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (HVAC Systems) >> Refrigerant Line >> Refrigerant Line And Associated Parts >> Installation

Refrigerant Line And Associated Parts: Installation

WARNING: This page is about a different car, the 2002 Isuzu Axiom. However, it is still accessible from the selected car via links, so may be relevant.

To install, follow the removal steps in the reverse order, noting the following point:

  1. O-rings cannot be reused. Always replace with new ones.
  2. Be sure to apply new compressor oil to the O-rings when connecting lines.
  3. Tighten the refrigerant line to the specified torque.

    Refer to MAIN DATA AND SPECIFICATIONS .

scientia non olet · About Mike's Workshop Manuals