Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Isuzu >> 2003 >> Axiom Base, 4WD >> Repair and Diagnosis >> Steering >> Power Steering >> Power-Assisted Steering System >> Front End Alignment Inspection and Adjustment >> Trim Height Adjustment

Trim Height Adjustment

Adjust the trim height (1) by means of the adjusting bolt on the height control arms.

CAUTION: When adjusting front end alignment, be sure to begin with trim height first, as it may change other adjusted alignments.
Fig 1: Adjusting Trim Height
G02714351Courtesy of ISUZU MOTOR CO.
Fig 2: Identifying Trim Height Adjusting Bolt
G02714352Courtesy of ISUZU MOTOR CO.
  1. Check and adjust the tire inflation pressures.
  2. Park the vehicle on a level ground and move the front of the vehicle up and down several times to settle the suspension.
  3. Make necessary adjustment with the adjusting bolt on the height control arms. Trim height:  119 +/- 5 mm (4.69 +/- 0.2 in)
scientia non olet · About Mike's Workshop Manuals