Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Isuzu >> 2002 >> Rodeo LS, 2.2 D >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Power-Assisted Steering System) >> Power Steering Pump >> Installation

Power Steering Pump: Installation

WARNING: This page is about a different car, the 2002 Isuzu Rodeo Sport. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the pump assembly to the pump bracket, tighten the fixing bolt to the specified torque.

    Torque:  46 N.m (34 lb ft)

  2. Install the flexible hose.

    Tighten the eye bolt to specified torque.

    Torque:  54 N.m (40 lb ft)

  3. Install the drive belt.
  4. Connect the suction hose, then fill and bleed system. Refer to BLEEDING THE POWER STEERING SYSTEM  .
scientia non olet · About Mike's Workshop Manuals