Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Isuzu >> 2002 >> Rodeo LS, 2.2 D >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Wheel Alignment Specifications & Adjustment Procedures) >> Wheel Alignment Procedures >> Toe-In Adjustment >> Front (Except CR-V & Insight)

Front (Except CR-V & Insight)

WARNING: This page is about a different car, the 2002 Honda Odyssey, 2002 Honda Civic, 2002 Honda CR-V, and 2002 Honda Accord. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check toe with wheels pointed straight ahead. See WHEEL ALIGNMENT SPECIFICATIONS  . If no adjustment is required, remove alignment equipment. If adjustment is required, go to next step.
  2. Loosen tie-rod lock nuts, and turn both tie rods in the same direction until the front wheels are pointing straight ahead. Turn both tie rods equally until the toe reading on turning radius gauge is correct. See WHEEL ALIGNMENT SPECIFICATIONS  . After adjusting, tighten the tie-rod lock nuts. Reposition the tie rod boot if it is twisted or displaced. Recheck toe-in.
scientia non olet · About Mike's Workshop Manuals