Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Isuzu >> 1988 >> Trooper II Base, Standard >> Repair and Diagnosis >> Transmission >> Manual Trans >> Servicing - M/T >> Adjustments >> Shift Control Cables >> I-Mark

Shift Control Cables: I-Mark

Place transaxle and gearshift lever in Neutral. Working with one control cable at a time, loosen adjustment nuts and turn until shift lever is in a 90° angle to housing as viewed from side and rear. Tighten adjustment nuts. See Fig 1 .

Fig 1: Adjusting I-Mark Gearshift Linkage
G100144Courtesy of ISUZU MOTOR CO.
scientia non olet · About Mike's Workshop Manuals