Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2024 >> QX80 Premium Select, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (DTCS) (4 Of 4) >> Engine (ECM) >> DTC P2118: Throttle Control Motor >> Confirmation Procedure

Confirmation Procedure

  1. PRECONDITIONING 

    If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

    >>

    GO TO 2.

  2. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Turn ignition switch ON and wait at least 2 seconds.
    2. Start engine and let it idle for 5 seconds.
    3. Check DTC.

    Is DTC detected?

    YES>>

    Refer to DTC Diagnosis Procedure .

    NO>>

    INSPECTION END

scientia non olet · About Mike's Workshop Manuals