Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2024 >> QX80 Premium Select, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (DTCS) (2 Of 4) >> Engine (ECM) >> DTC P0182: FTT Sensor >> DTC Diagnosis Procedure

DTC Diagnosis Procedure

  1. CHECK DTC WITH COMBINATION METER 

    Refer to Diagnosis Description . Is the inspection result normal?

    YES>>

    GO TO 2.

    NO>>

    Refer to Component Function Check .

  2. CHECK FUEL TANK TEMPERATURE SENSOR POWER SUPPLY CIRCUIT 
    1. Turn ignition switch OFF.
    2. Disconnect "fuel level sensor unit and fuel pump" harness connector.
    3. Turn ignition switch ON.
    4. Check the voltage between "fuel level sensor unit and fuel pump" harness connector and ground.
      Fuel level sensor unit and fuel pump Ground Voltage (V)
      Connector Terminal
      C5 4 Ground Approx. 5

    Is the inspection result normal?

    YES>>

    GO TO 4.

    NO>>

    GO TO 3.

  3. DETECT MALFUNCTIONING PART 

    Check the following.

    • Harness for open or short between ECM and "fuel level sensor unit and fuel pump"
    • Loose or poor connection for each connector and harness

    >>

    Repair open circuit, short to ground or short to power in harness or connector.

  4. CHECK FUEL TANK TEMPERATURE SENSOR GROUND CIRCUIT FOR OPEN AND SHORT 
    1. Turn ignition switch OFF.
    2. Disconnect combination meter harness connector.
    3. Check the continuity between "fuel level sensor unit and fuel pump" harness connector and "combination meter" harness connector.
      Fuel level sensor unit and fuel pump Combination meter Continuity
      Connector Terminal Connector Terminal
      C5 5 M344 46 Existed
    4. Also check harness for short to ground and short to power.

    Is the inspection result normal?

    YES>>

    GO TO 6.

    NO>>

    GO TO 5.

  5. DETECT MALFUNCTIONING PART 

    Check the following.

    • Harness for open or short between "fuel level sensor unit and fuel pump" and "combination meter"
    • Loose or poor connection for each connector and harness

    >>

    Repair open circuit, short to ground or short to power in harness or connector.

  6. CHECK FUEL TANK TEMPERATURE SENSOR 

    Refer to Component Inspection . Is the inspection result normal?

    YES>>

    GO TO 7.

    NO>>

    Replace "fuel level sensor unit and fuel pump". Refer to FUEL LEVEL SENSOR UNIT, FUEL FILTER AND FUEL PUMP ASSEMBLY : Removal and Installation .

  7. CHECK INTERMITTENT INCIDENT 

    Refer to Inspection .

    >>

    INSPECTION END