Diagnosis Procedure
Armed phase is not activated when door is locked using mechanical key.
NOTE:
Check that vehicle is under the condition shown in "Conditions of vehicle" before starting diagnosis, and check each symptom.
CONDITION OF VEHICLE (OPERATING CONDITION)
Confirm the setting of "SECURITY ALARM SET" is ON in "WORK SUPPORT" mode of "THEFT ALM" of "BCM" using CONSULT.
- CHECK POWER DOOR LOCK SYSTEM
Lock/unlock door with mechanical key.
Refer to System Description . Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Check power door lock system. Refer to Diagnosis Procedure .
- CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES>>
Check intermittent incident. Refer to Inspection .
NO>>
GO TO 1.