Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2024 >> QX80 Premium Select, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Audio, Visual And Navigation System >> Removal And Installation >> Around View Monitor Control Unit >> AROUND VIEW MONITOR CONTROL UNIT : Removal and Installation

AROUND VIEW MONITOR CONTROL UNIT : Removal and Installation

REMOVAL 

CAUTION:

Before replacing around view monitor control unit, perform "Read/Write Configuration" to save or print current vehicle specification. For details, Refer to Work Procedure .

  1. Remove the glove box assembly. Refer to INSTRUMENT PANEL ASSEMBLY : Removal and Installation .
  2. Remove around view monitor control unit mounting screws.
  3. Disconnect around view monitor control unit connector to remove around view monitor control unit.

INSTALLATION 

  1. Install in the reverse order of removal.
  2. Perform camera image calibration. Refer to Work Procedure .
    CAUTION:
    • Be sure to perform "Read/Write Configuration" when replacing around view monitor control unit. Refer to Work Procedure .
    • Perform the calibration and perform the writing to the around view monitor control unit when removing and replacing each camera, removing the camera mounting parts (front grille, door mirror, etc.) and replacing the around view monitor control unit.
scientia non olet · About Mike's Workshop Manuals