Work Procedure

Always perform the side radar configuration after replacing the side radar.

1. SIDE RADAR CONFIGURATION 

   Perform the side radar configuration with CONSULT. Refer to Work Procedure .

   >>

   GO TO 2.

2. SIDE RADAR ALIGNMENT 

   Perform the side radar alignment with CONSULT. Refer to Work Procedure .

   >>

   GO TO 3.

3. PERFORM SELF-DIAGNOSIS 

   Perform the self-diagnosis of side radar with CONSULT. Check if any DTC is detected.

   Is any DTC detected?

   YES>>

   Perform the trouble diagnosis for the detected DTC.

   • Side radar LH: Refer to DTC Index 
   • Side radar RH: Refer to DTC Index 

   NO>>

   INSPECTION END