DTC Description
DTC DETECTION LOGIC
| DTC | CONSULT name | DTC detecting condition | |
|---|---|---|---|
| B0001-13 | DRIVER AIR BAG MODULE[OPEN] | Diagnosis condition | When ignition switch is ON |
| Signal (terminal) | Driver air bag module circuit (DR1) (terminal 32 and 33) | ||
| Threshold | - | ||
| Diagnosis delay time | - | ||
| B0001-12 | DRIVER AIR BAG MODULE[VB-SHORT] | Diagnosis condition | When ignition switch is ON |
| Signal (terminal) | Driver air bag module circuit (DR1) (terminal 32 and 33) | ||
| Threshold | - | ||
| Diagnosis delay time | - | ||
| B0001-11 | DRIVER AIR BAG MODULE[GND-SHORT] | Diagnosis condition | When ignition switch is ON |
| Signal (terminal) | Driver air bag module circuit (DR1) (terminal 32 and 33) | ||
| Threshold | - | ||
| Diagnosis delay time | - | ||
| B0001-1A | DRIVER AIR BAG MODULE[SHORT] | Diagnosis condition | When ignition switch is ON |
| Signal (terminal) | Driver air bag module circuit (DR1) (terminal 32 and 33) | ||
| Threshold | - | ||
| Diagnosis delay time | - | ||
| B0001-09 | DRIVER AIR BAG MODULE[SHORT] | Diagnosis condition | When ignition switch is ON |
| Signal (terminal) | Driver air bag module circuit (DR1) (terminal 32 and 33) | ||
| Threshold | - | ||
| Diagnosis delay time | - | ||
| B0001-00 | DRIVER AIR BAG MODULE[SHORT] | Diagnosis condition | When ignition switch is ON |
| Signal (terminal) | Driver air bag module circuit (DR1) (terminal 32 and 33) | ||
| Threshold | - | ||
| Diagnosis delay time | - | ||
POSSIBLE CAUSE
[OPEN]
- Connection malfunction or open circuit of harness and connector
- Internal malfunction of driver air bag module
- Internal malfunction of air bag diagnosis sensor unit
[VB-SHORT]
- Connection malfunction or short circuit to power supply of harness and connector
- Internal malfunction of driver air bag module
- Internal malfunction of air bag diagnosis sensor unit
[GND-SHORT]
- Connection malfunction or short circuit to ground of harness and connector
- Internal malfunction of driver air bag module
- Internal malfunction of air bag diagnosis sensor unit
[SHORT]
- Connection malfunction or short circuit of harness and connector
- Internal malfunction of driver air bag module
- Internal malfunction of air bag diagnosis sensor unit
FAIL-SAFE
-
DTC CONFIRMATION PROCEDURE (With CONSULT)
- CHECK SELF DIAGNOSTIC RESULT
CONSULT
- Ignition switch ON.
- Check for DTC.
Is the DTC detected?
YES>>
(Current DTC) Refer to Diagnosis Procedure .
YES>>
(Past DTC) GO TO 2.
NO>>
Inspection End.
- ERASE SELF DIAGNOSTIC RESULT
- Erase the DTC.
Can the DTC be erased?
YES>>
Inspection End.
NO>>
Refer to Diagnosis Procedure .
DTC CONFIRMATION PROCEDURE (Without CONSULT)
- CHECK SELF DIAGNOSTIC RESULT
-
- Ignition switch ON.
- Check the air bag warning lamp status. Refer to On Board Diagnosis Function .
NOTE:SRS will not enter diagnosis mode if no malfunction is detected in user mode.
Is the DTC detected?
YES>>
Refer to Diagnosis Procedure .
NO>>
Inspection End.
-