DTC Description

DTC DETECTION LOGIC

DTC	CONSULT screen terms (Trouble diagnosis content)	DTC detecting condition
P23EB	A camshaft posi signal B2 ("A" camshaft position signal output circuit high bank 2)	When the intake camshaft position sensor signal edge count is more than 4 counts per one camshaft rotation for approx. 1 second.

POSSIBLE CAUSE

Harness or connectors
[Intake Camshaft Position Sensor (bank 2) circuit is open or shorted.]
Intake Camshaft Position Sensor (bank 2)
Electric intake valve timing control actuator (bank 2) circuit is open or shorted.

FAIL-SAFE

Fail safe mode	Vehicle behavior
Device fix mode	Fixes electric intake valve timing control motor in the reference position. Fixes exhaust valve timing control solenoid valve in the reference position.
Combustion control mode	No stratified charge combustion at starting (cold start).