Physical Values
TERMINAL LAYOUT
PHYSICAL VALUES
| Terminal No. (wire color) |
Description | Condition | Voltage (V) | ||
|---|---|---|---|---|---|
| + | - | Signal name | Input/Output | ||
| 3 (V) |
Ground | Encoder power supply | Output | When ignition switch ON or power window timer operates. | 9 - 16 |
| 4 (Y) |
Ground | Battery power supply | Input | - | 9 - 16 |
| 5 (G) |
Ground | Front power window motor (driver side) DOWN signal | Output | When front switch (driver side) in power window main switch is operated DOWN | 9 - 16 |
| 6 (L) |
Ground | Front power window motor (driver side) UP signal | Output | When front switch (driver side) in power window main switch is operated UP | 9 - 16 |
| 7 (B) |
Ground | Ground | - | - | 0 - 1 |
| 9 (BR) |
Ground | Ignition power supply | Input | Ignition switch ON | 9 - 16 |
| Other than above | 0 - 1 | ||||
| 10 (B) |
Ground | Encoder ground | - | - | 0 - 1 |
| 11 (GR) |
Ground | Encoder pulse signal 1 | Input | When power window motor operates. | |
| 12 (BR) |
Ground | Encoder pulse signal 2 | Input | When power window motor operates. | |
| 13 (SB) |
Ground | Power window serial link | Input/Output | IGN SW ON or power window timer operating. | |