Component Inspection (Fuel Pump Control Module)

1. Check the voltage between fuel pump control module terminals under the following conditions.

   Fuel pump control module			Condition	Voltage (Approx.)
   Connector	+	-
   	Terminal
   B58	6	5	For 1 second after turning ignition switch ON	12.9 V
   			More than 1 second after turning ignition switch ON	0 V
   			Idle speed	8.1 - 12.9 V

Is the inspection result normal?

YES>>

INSPECTION END

NO>>

Replace fuel pump control module. Refer to Removal and Installation .