Diagnosis Procedure

1. 1. Turn ignition switch ON and wait at least 1 second.
   2. Turn ignition switch OFF and wait at least 10 seconds.
   3. Repeat step 1 and 2 for 10 times.
   4. Erase DTC.
   5. Turn ignition switch OFF and wait at least 10 seconds.
   6. Turn ignition switch ON.
   7. Check the DTC.

Is DTC erased?

YES>>

INSPECTION END

NO>>

GO TO 2.

1. 1. Replace ECM. Refer to Removal and Installation .
   2. Perform Description .

>>

INSPECTION END