Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2022 >> QX60 Autograph, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (DTC/Circuit Diagnosis) (4 Of 6) >> DTC/Circuit Diagnosis >> DTC P06E6: Internal Control Module >> DTC Description >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. PRECONDITIONING 

    TESTING CONDITION:

    Before performing the following procedure, confirm that battery voltage is 11 V or more with ignition switch ON.

    GO TO 2.

  2. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Turn ignition switch ON and wait at least 10 second.
    2. Turn ignition switch OFF and wait at least 10 seconds.
    3. Repeat step 1 and 2 for 2 times.
    4. Turn ignition switch ON.
    5. Check the DTC.

    Is the DTC detected?

    YES

    Proceed to DTC Diagnosis Procedure .

    NO-1

    To check malfunction symptom before repair: Refer to Intermittent Incident .

    NO-2

    Confirmation after repair: INSPECTION END

scientia non olet · About Mike's Workshop Manuals