System Is Not Displayed On Consult: Description

"DAST 1", "DAST 2" or "EPS/DAST 3" is not displayed on CONSULT.

Self-diagnostic result or System condition

Detected DTC or system condition			Possible cause	Reference
DAST 1	DAST 2	EPS/DAST 3	Possible cause	Reference
System is not displayed on CONSULT	System is not displayed on CONSULT	System is not displayed on CONSULT	Battery power supply circuit Ignition power supply circuit Power supply circuit for steering force control module Steering force control module harness connector	TYPE 1: Refer to Diagnosis Procedure .
System is not displayed on CONSULT	C13BE-00, C13C0-00 or C13C2-00	C13BE-00, C13C0-00 or C13C2-00	FlexRay communication line Steering angle main control module	TYPE 2: Refer to Diagnosis Procedure .
System is not displayed on CONSULT	System is not displayed on CONSULT	C13C1-00 and C13C4-00	FlexRay communication line Steering force control module Steering angle main control module Steering angle sub control module	TYPE 3: Refer to Diagnosis Procedure .
C13C0-00, C13C2-00 or System is not displayed on CONSULT	System is not displayed on CONSULT	C13BE-00, C13C0-00 or C13C3-00	FlexRay communication line Steering angle sub control module	TYPE 4: Refer to Diagnosis Procedure .
System is not displayed on CONSULT	C13C0-00 and C13C2-00	C13C0-00 and C13C2-00	Power supply circuit for steering angle main control module Steering angle main control module harness connector Ignition power supply circuit (between steering angle main control module and steering angle sub control module)	TYPE 5: Refer to Diagnosis Procedure .
System is not displayed on CONSULT	System is not displayed on CONSULT	C13C0-00, C13C2-00 and C13C3-00	Ignition power supply circuit (between steering force control module and steering angle sub control module) Steering force control module Steering angle sub control module	TYPE 6: Refer to Diagnosis Procedure .
C13C0-00 and C13C2-00	System is not displayed on CONSULT	C13C0-00 and C13C3-00	Steering angle sub control module harness connector	TYPE 7: Refer to Diagnosis Procedure .
System is not displayed on CONSULT	System is not displayed on CONSULT	C13BE-00, C13C1-00 or C13C4-00	FlexRay communication line Steering force control module	TYPE 8: Refer to Diagnosis Procedure .