Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2022 >> QX50 Essential, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Around View Monitor System) >> Around View Monitor System >> DTC/Circuit Diagnosis >> U0428 Steering Angle Sensor >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2021 Infiniti QX50. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC PRIORITY 

    If DTC U0428 is displayed with DTC U1232, first perform the diagnosis for DTC U1232.

    Is DTC U1232 detected?

    YES

    Proceed to DTC Description .

    NO

    GO TO 2.

  2. PERFORM DTC CONFIRMATION PROCEDURE 

    SYMBOL CONSULT

    1. Ignition switch ON.
    2. Select "Self Diagnostic Result" mode of "AVM".
    3. Check DTC.

    Is DTC U0428 detected?

    YES

    Proceed to Diagnosis Procedure .

    NO

    To check malfunction symptom before repair, Refer to: Intermittent Incident .

    NO

    Confirmation after repair: Inspection End.

scientia non olet · About Mike's Workshop Manuals