DTC Detection Logic
NOTE:
- This self-diagnosis has the one trip detection logic. When malfunction A is detected, DTC is not stored in ECM memory. And in that case, 1st trip DTC and 1st trip freeze frame data are displayed. 1st trip DTC is erased when ignition switch is turned OFF. And even when malfunction A is detected in two consecutive trips, DTC is not stored in ECM memory.
|
DTC No. |
CONSULT screen terms (Trouble diagnosis content) |
DTC detecting condition |
|
|
P1572 |
ASCD BRAKE SW (Brake pedal position switch) |
A |
ON signals from the stop lamp switch and the BRAKE pedal position switch are sent to ECM at the same time. |
|
B |
BRAKE pedal position switch signal is not sent to ECM for extremely long time while the vehicle is being driven |
||