Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2020 >> QX80 Luxe, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Power Control System (Diagnostics)) >> Component Parts/Circuit Diagnosis >> Push-Button Ignition Switch >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2020 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK FUNCTION 
    1. Select "PUSH SW" in "Data Monitor" of BCM with CONSULT.
    2. Check the push-button ignition switch signal under the following conditions.

    Test item

    Condition

    Status

    PUSH SW

    Push-button ignition switch is pressed

    ON

    Push-button ignition switch is not pressed

    OFF

    Is the indication normal?

    YES

    INSPECTION END.

    NO

    Refer to Diagnosis Procedure .

scientia non olet · About Mike's Workshop Manuals