Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2020 >> QX60 Pure, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Power Control System) >> Removal And Installation >> IPDM E/R (Intelligent Power Distribution Module Engine Room) >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery terminal. Refer to Removal and Installation .
  2. Release the pawls (A) and separate the IPDM E/R (1) from the case.
    GNSDB111756Courtesy of NISSAN NORTH AMERICA, INC.
  3. Disconnect all harness connectors (1) from the IPDM E/R (2) and remove.
    GNSDB114237Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals