Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2020 >> QX60 Pure, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Security Control System) >> Removal And Installation >> Immobilizer Control Module >> Removal and Installation >> REMOVAL (Canada only)

REMOVAL (Canada only)

WARNING: This page is about a different car, the 2019 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove instrument panel assembly. Refer to Removal and Installation.
  2. Disconnect the harness connector from the dongle unit (1).
    GNSAWDIA1233Z-233Courtesy of NISSAN NORTH AMERICA, INC.
  3. Remove screw (A) and dongle unit (1) from heating and cooling unit assembly (2).
scientia non olet · About Mike's Workshop Manuals