Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2020 >> Q60 Pure, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (DTCS) (13 Of 19) >> Engine (ECM) >> DTC P1557: Battery Temperature Sensor >> Confirmation Procedure

Confirmation Procedure

  1. PRECONDITIONING 

    Turn ignition switch OFF and wait at least 10 seconds.

    GO TO 2.

  2. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Start the engine and let it idle at least 10 seconds.
    2. Check 1st trip DTC.

    Is DTC P1557 detected?

    YES

    Refer to DTC Diagnosis Procedure .

    NO

    To check malfunction symptom before repair: Refer to Inspection .

    NO

    Confirmation after repair: INSPECTION END

scientia non olet · About Mike's Workshop Manuals