Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2020 >> Q60 Pure, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (DTCS) (10 Of 19) >> Engine (ECM) >> DTC P0603: ECM >> Confirmation Procedure

Confirmation Procedure

  1. PRECONDITIONING 

    TESTING CONDITION:

    Before performing the following procedure, confirm that battery voltage is 11 V or more with ignition switch ON.

    GO TO 2.

  2. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Turn ignition switch ON and wait at least 1 second.
    2. Turn ignition switch OFF and wait at least 10 seconds.
    3. Repeat step 1 and 2 for 10 times.
    4. Turn ignition switch ON.
    5. Check 1st trip DTC.

    Is DTC P0603 detected?

    YES

    Proceed to DTC Diagnosis Procedure .

    NO

    To check malfunction symptom before repair: Refer to Inspection .

    NO

    Confirmation after repair: INSPECTION END

scientia non olet · About Mike's Workshop Manuals