Input/Output Signal Item

WARNING: This page is about a different car, the 2019 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

Reception unit	Transmit unit	Signal name		Description
Chassis control module	Lane camera unit 2	Chassis communication	Detected lane condition signal	Receives detection results of lane marker
			Lane camera unit 2 condition signal	Receives lane camera unit 2 condition
	ABS actuator and electric unit (control unit)	CAN communication	Vehicle speed signal (ABS)	Receives wheel speeds of front wheels
	BCM	CAN communication	Turn indicator signal	Receives an operational state of the turn signal lamp and the hazard lamp
			Front wiper request signal	Receives an operational state of the front wiper
	ADAS control unit	Chassis communication	LDW ON signal	Receives an ON/OFF state of LDW
	Drive mode select switch	Hard wire	Drive mode select switch signal	Detects the snow mode selection.
ADAS control unit	Display control unit	CAN communication	System selection signal	Receives a selection state of each item in "Driver Aids" selected with the integral switch.
Lane camera unit 2	Chassis control module	Chassis communication	Vehicle speed signal	Transmits a vehicle speed calculated by the chassis control module
			Turn indicator signal	Transmits a turn indicator signal received from BCM
Combination meter (Via ADAS control unit)		CAN communication and Chassis communication	LDW system display signal	Transmits a signal to display a state of the system on the information display
ADAS control unit 2 (Via ADAS control unit)		ITS communication and Chassis communication	Steering vibration signal	Transmits steering vibration signal to activates the starring vibration motor