Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2019 >> Q60 Pure, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Driver Assistance System (DTC/Circuit Diagnosis) >> DTC/Circuit Diagnosis >> DTC C1B20: Control Module >> Driver Assistance Buzzer Control Module >> Component Inspection

Component Inspection

  1. CHECK DRIVER ASSISTANCE BUZZER 
    1. Turn ignition switch OFF.
    2. Disconnect driver assistance buzzer connector.
    3. Check resistance between driver assistance buzzer terminals.

    Terminal

    Resistance

    1

    2

    Approx. 6 Ohm

    Is the inspection result normal?

    YES

    INSPECTION END

    NO

    Replace driver assistance buzzer.

scientia non olet · About Mike's Workshop Manuals