Confirmation Procedure

If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

GO TO 2.

With CONSULT

1. Start the engine.
2. Select "VHCL HEIGHT SEN" in "Data Monitor" in "E-SUS".
3. Drive vehicle and maintain the following conditions for 5 minutes or more.

   Vehicle speed

   : 5 km/h (3 MPH) or more

Does the value of "VHCL HEIGHT SEN" change?

YES

INSPECTION END

NO

Refer to DTC Diagnosis Procedure .