Diagnosis Procedure
WARNING: This page is about a different car, the 2019 Nissan Armada and 2018 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK CONNECTOR
- Turn the ignition switch OFF.
- Disconnect the battery cable from the negative terminal.
- Check the following terminals and connectors for damage, bend and loose connection (connector side and harness side).
- Harness connector B239
- Harness connector B63
Is the inspection result normal?
YES
GO TO 2 .
NO
Repair the terminal and connector.
- CHECK HARNESS CONTINUITY (OPEN CIRCUIT)
- Disconnect the following harness connectors.
- Side radar RH
- Harness connectors B239 and B63
- Check the continuity between the side radar RH harness connector and the harness connector.
Side radar RH harness connector
Harness connector
Continuity
Connector No.
Terminal No.
Connector No.
Terminal No.
B243
4
B239
7
Existed
3
3
Existed
Is the inspection result normal?
YES
GO TO 3 .
NO
Repair the main line between the side radar RH and the harness connector B239.
- Disconnect the following harness connectors.
- CHECK HARNESS CONTINUITY (OPEN CIRCUIT)
- Disconnect the connector of side radar LH.
- Check the continuity between the harness connector and the side radar LH harness connector.
Harness connector
Side radar LH harness connector
Continuity
Connector No.
Terminal No.
Connector No.
Terminal No.
B63
7
B74
4
Existed
3
3
Existed
Is the inspection result normal?
YES
Check CAN system type decision again.
YES
Error was detected in the main line between the side radar RH and the side radar LH.
NO
Repair the main line between the harness connector B63 and the side radar LH.