Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2018 >> QX80 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 171 (Driver Assistance System (DTCS)) >> ICC/ADAS (ADAS Control Unit) >> DTC C1B85: Distance Sensor Abnormal Temp >> Confirmation Procedure

Confirmation Procedure

WARNING: This page is about a different car, the 2020 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Turn the ignition switch OFF.
    2. Wait for 10 minutes or more to cool the ICC sensor.
    3. Start the engine.
    4. Turn the ICC system ON.
    5. Perform "All DTC Reading" with CONSULT.
    6. Check if the "C1B85" is detected as the current malfunction in "Self Diagnostic Result" of "ICC/ADAS".

    Is "C1B85" detected as the current malfunction?

    YES

    Refer to DTC Diagnosis Procedure .

    NO

    To check malfunction symptom before repair: Refer to Inspection .

    NO

    Confirmation after repair: INSPECTION END

scientia non olet · About Mike's Workshop Manuals