Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2018 >> QX80 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 171 (Driver Assistance System (DTCS)) >> ICC/ADAS (ADAS Control Unit) >> DTC C1A39: Steering Angle Sensor >> Confirmation Procedure

Confirmation Procedure

WARNING: This page is about a different car, the 2020 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC PRIORITY 

    If DTC "C1A39" is displayed with DTC "U1000", first diagnose the DTC "U1000".

    Is applicable DTC detected?

    YES

    Perform diagnosis of applicable. Refer to DTC Description .

    NO

    GO TO 2.

  2. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Start the engine.
    2. Turn the MAIN switch of ICC system ON.
    3. Perform "All DTC Reading" with CONSULT.
    4. Check if the "C1A39" is detected as the current malfunction in self-diagnosis results of "ICC/ADAS".

    Is "C1A39" detected as the current malfunction?

    YES

    Refer to DTC Diagnosis Procedure .

    NO

    To check malfunction symptom before repair: Refer to Inspection .

    NO

    Confirmation after repair: INSPECTION END

scientia non olet · About Mike's Workshop Manuals