Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2018 >> QX80 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 171 (Driver Assistance System (DTCS)) >> BSW/Buzzer (Driver Assistance Buzzer Control Module) >> DTC U1010: Control Unit (Can) >> DTC Diagnosis Procedure

DTC Diagnosis Procedure

WARNING: This page is about a different car, the 2020 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Turn the MAIN switch of ICC system ON.
    2. Perform "All DTC Reading" with CONSULT.
    3. Check if the "U1010" is detected as the current malfunction in "Self Diagnostic Result" of "BSW/BUZZER".

    Is "U1010" detected as the current malfunction?

    YES

    Replace the driver assistance buzzer control module. Refer to Removal and Installation .

    NO

    INSPECTION END

scientia non olet · About Mike's Workshop Manuals