Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2018 >> QX80 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 171 (Driver Assistance System (DTCS)) >> BSW/Buzzer (Driver Assistance Buzzer Control Module) >> DTC U1000: Can Comm Circuit >> DTC Diagnosis Procedure

DTC Diagnosis Procedure

WARNING: This page is about a different car, the 2020 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM THE SELF-DIAGNOSIS 
    1. Turn the ignition switch ON.
    2. Turn the MAIN switch of ICC system ON, and then wait for 2 seconds or more.
    3. Perform "All DTC Reading" with CONSULT.
    4. Check if the "U1000" is detected as the current malfunction in "Self Diagnostic Result" of "BSW/BUZZER".

    Is "U1000" detected as the current malfunction?

    YES

    Refer to Trouble Diagnosis Flow Chart .

    NO

    Refer to Inspection .

scientia non olet · About Mike's Workshop Manuals