Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2018 >> QX30 Essential, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Heater Air Conditioning Control System) >> System Description >> Diagnosis System (A/C Auto Amp.) >> CONSULT Function >> Data Monitor

Data Monitor

WARNING: This page is about a different car, the 2018 Infiniti Q60. However, it is still accessible from the selected car via links, so may be relevant.

Input/output signal of A/C auto amp. can be checked.

NOTE: The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.
Display item list

Monitor item [Unit]

Description

AMB TEMP SEN

[ deg.C (deg.F)]

Ambient temperature value converted from ambient sensor signal received from ambient sensor

IN-VEH TEMP

[ deg.C (deg.F)]

In-vehicle temperature value converted from in-vehicle sensor signal received from in-vehicle sensor

INT TEMP SEN

[ deg.C (deg.F)]

Evaporator fin temperature value converted from intake sensor signal received from intake sensor

SUNLOAD SEN

[w/m 2 ]

Sunload value converted from sunload sensor signal received from sunload sensor

AMB SEN CAL

[ deg.C (deg.F)]

Ambient temperature value calculated by A/C auto amp.

IN-VEH CAL

[ deg.C (deg.F)]

In-vehicle temperature value calculated by A/C auto amp.

INT TEMP CAL

[ deg.C (deg.F)]

Evaporator fin temperature value calculated by A/C auto amp.

SUNL SEN CAL

[w/m 2 ]

Sunload value calculated by A/C auto amp.

COMP REQ SIG

[On/Off]

Displays A/C ON signal ON/OFF status transmitted to ECM.

COMP ECV DUTY

[%]

Duty ratio of ECV (electrical control valve) judged by A/C auto amp.

FAN REQ SIG

[On/Off]

Displays blower fan ON signal ON/OFF status transmitted to ECM.

FAN DUTY

Duty ratio of blower motor judged by A/C auto amp.

XM

Target discharge air temperature (Driver side) judged by A/C auto amp. depending on the temperature setting and the value from each sensor.

ENG COOL TEMP

[ deg.C (deg.F)]

Engine coolant temperature signal value received from ECM via CAN communication

VEHICLE SPEED

[Mph (km/h)]

Vehicle speed signal value received from combination meter via CAN communication.

BLOWER MOT VOLT

[V]

NOTE: This item is indicated, but not monitored.

GAS SEN LEVEL *

Contamination level of ambient air that is judged by A/C auto amp. according to value from exhaust gas / outside odor detecting sensor.

*: With ACCS