How To Set

WARNING: This page is about a different car, the 2018 Infiniti Q60. However, it is still accessible from the selected car via links, so may be relevant.

With CONSULT

Perform "TARGET EVAPORATOR TEMP UPPER LIMIT SETTING" in "WORK SUPPORT" mode of "HVAC" using CONSULT.

Work support items	Display	Setting
TARGET EVAPORATOR TEMP UPPER LIMIT SETTING	Initial setting	Setting 1
	Low	Setting 4
	Middle (initial status)	Setting 3
	High	Setting 2

Setting	Target evaporator temperature upper limit value	Evaporator freezing protection control	Refrigerant discharge amount control
Setting 1	10 deg.C (50 deg.F)	Minimum operation ratio of compressor	Minimum refrigerant discharge amount
Setting 2	7 deg.C (45 deg.F)	Operation ratio of compressor increases from setting 1.	Refrigerant discharge amount increases from setting 1.
Setting 3	5 deg.C (41 deg.F)	Operation ratio of compressor increases from setting 2.	Refrigerant discharge amount increases from setting 2.
Setting 4	3 deg.C (37 deg.F)	Operation ratio of compressor increases from setting 3.	Refrigerant discharge amount increases from setting 3.

NOTE: When the battery cable is disconnected from the negative terminal or when the battery voltage becomes 10 V or less, the setting of the target evaporator temperature upper limit setting may be cancelled.