Fuel Pressure Release

WARNING: This page is about a different car, the 2018 Infiniti Q60. However, it is still accessible from the selected car via links, so may be relevant.

FUEL PRESSURE RELEASE
With CONSULT
1. Turn ignition switch ON.
2. Select ENGINE using CONSULT.
3. Perform "FUEL PRESSURE RELEASE" in "WORK SUPPORT" mode.
4. Start engine.
5. After engine stalls, crank it two or three times to release all fuel pressure.
6. Turn ignition switch OFF.
Without CONSULT
1. Remove fuel pump fuse.
  NOTE:
  - For the fuse number, refer to Wiring Diagram .
  - For the fuse arrangement, refer to Fuse, Connector and Terminal Arrangement .
2. Start engine.
3. After engine stalls, crank it two or three times to release all fuel pressure.
4. Turn ignition switch OFF.
5. Reinstall fuel pump fuse after servicing fuel system.
INSPECTION END