Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2018 >> QX30 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Engine Control System (Introduction And Basic Inspection) (2.0L)) >> Basic Inspection >> Fuel Pressure >> Work Procedure >> Low Fuel Pressure Check

Low Fuel Pressure Check

WARNING: This page is about a different car, the 2018 Infiniti Q60. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECTION START 

    SYMBOL With CONSULT

    1. Turn ignition switch OFF.
    2. Start the engine and let it idle.
    3. On CONSULT screen, select "FPCM" >> "DATA MONITOR" >> "FUEL PRESSURE".
    4. Check that the indicated value is between 400 kPa (4 bar, 4.08 kg/cm 2 , 58 psi) and 670 kPa (6.7 bar, 6.834 kg/cm 2 , 97.15 psi).

    INSPECTION END

scientia non olet · About Mike's Workshop Manuals