Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2018 >> QX30 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Drive Mode System) >> Removal And Installation >> Drive Mode Select Switch >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Infiniti Q60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove center console side finisher LH and center console side finisher RH. Refer to Exploded View .
  2. Remove cup holder assembly. Refer to Exploded View .
  3. Remove fixing screw, and then remove finisher SYMBOL .
    GNSJSOIA0819Z-819Courtesy of NISSAN NORTH AMERICA, INC.
  4. Disconnect harness connector from drive mode select switch.
  5. Remove drive mode select switch fixing screw, and then remove drive mode select switch.
scientia non olet · About Mike's Workshop Manuals