Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2018 >> Q60 Sport, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Control System (Introduction And Basic Inspection) (2.0L)) >> Basic Inspection >> Fuel Pressure >> Work Procedure >> Low Fuel Pressure Check

Low Fuel Pressure Check

WARNING: This page is about a different variant/trim than selected.
  1. INSPECTION START 

    SYMBOL With CONSULT

    1. Turn ignition switch OFF.
    2. Start the engine and let it idle.
    3. On CONSULT screen, select "FPCM" >> "DATA MONITOR" >> "FUEL PRESSURE".
    4. Check that the indicated value is between 400 kPa (4 bar, 4.08 kg/cm 2 , 58 psi) and 670 kPa (6.7 bar, 6.834 kg/cm 2 , 97.15 psi).

    INSPECTION END

scientia non olet · About Mike's Workshop Manuals